This project was yet another home run from the Decorative Concrete Resurfacing (DCR) team located in High Point, NC. DCR partnered with Tnemec to provide resinous flooring installation services for a new construction manufacturing facility in Western North Carolina. Each floor was mechanically prepared in accordance with SSPC SP-13/NA CE No. 6 Surface Preparation of concrete and then coated with two separate coatings systems. The first was a thin film system that consisted of two pigmented epoxy coats at approximately 20 dry mils (Tnemec Series 237 Power-Tread) followed by a clear high solids polyurethane topcoat at 2-3 dry mils (Tnemec Series 248 Everthane). The second system was a flake broadcast system utilizing Tnemec's multi-purpose clear non-yellowing epoxy (Tnemec Series 222 Deco-Tread) with a high solids polyurethane (Tnemec Series 248 Everthane) in a multi-coat system to provide a 1/8 coatings system installed. The functional results are robust industrial resinous floors that will perform for years to come for this facility,  but with the aesthetic appeal of any high-end architectural finish.